You can modify the PCMSERVE.INI file to set default trip options so that these options are active each time you use PC*MILER Connect or PC*MILER Spreadsheets. The .INI file is in your Windows or Windows NT folder, and can be opened using Notepad, Wordpad or another text editor.
Please note that an option set with a Connect or Spreadsheets function takes precedence over both the .INI setting and the setting in the PC*MILER user interface. The order of precedence is:
- Options that are set using Connect or Spreadsheets functions prevail over the default options set in PC*MILER and the .INI file.
- Options set in PCMSERVE.INI prevail over those set in PC*MILER.
- An option set as the default in PC*MILER takes effect only in the absence of settings 1 and 2, and only when a key for that option exists in the PCMSERVE.INI without an assigned value. For example, the Distance Precision setting in PC*MILER would only take effect when the line DistancePrecision= is included in the [OPTIONS] section of the INI. (See below.)
About Connect
Note also that the same defaults are used for all clients that connect via PC*MILER Connect at the same time. You have to shut down all client applications to unload Connect before any changes to the .INI file will take effect. Settings in the .INI that can be added or edited are listed below. If any key doesn’t have a value or is not found in the .INI file, it assumes the default value or the value set in the PC*MILER user interface. These defaults are used to initialize each new trip. After creating a trip, you can change the options for that trip through function calls.
About Spreadsheets
Excel must be closed and reopened for .INI file setting changes to take effect.
.INI Settings
| Key | Valid Values (Defaults are Underlined) | Description |
| [Logging] |
|
|
| Enable= | 0 1 | Should log files be generated (1) or not (0). Default = 0 |
| File= | Path/file name of log file. | |
| Append= | 0 1 | Append to old file (1) or write over (0). Default = 0 |
| MaxStrLen= | Any integer up to 254 | Assign number of characters to truncate log messages to (optional) |
| DisplayTime= | 0 1 | When DisplayTime = 1, date and time are shown at the beginning of each line in the specified log file. |
| MultiThread= | 0 1 | When set to = 1, the log will contain thread IDs to show the API’s executed on each current running thread. Default = 0. |
| [Defaults] | ||
| CalcType= | Practical Shortest National AvoidToll Air | Set the default routing type: most Practical, Shortest by distance, favor State + National Network (includes 53 foot routing), avoid tolls, or Air (straight line). Note: Toll-Discouraged and National routing are based on Practical miles. |
| Units= | Miles Kilometers | What unit of measure should distance be shown in. |
| ChangeDest= | TRUE FALSE | When optimizing the route, should the trip’s destination be optimized also (T). |
| Borders= | TRUE | Should the engine try to keep routes within the United States (F), or can they cross and recross the borders at will (T). |
| HubMode= | TRUE | Calculate the routes from the origin to each stop (T), not through each stop (F). |
| AlphaOrder= | TRUE | List the states in the State Report in alphabetical order (T) or in the order driven (F). |
| FerryMiles= | TRUE FALSE | Use ferry distances in mileage and cost calculations (T), or don’t use (F). |
| AvoidFerries= | TRUE FALSE | Set to True to avoid ferries for all routes. (Available in PC*MILER 35 and higher) |
| LightVehicle= | TRUE FALSE | Should the DLL use Light Vehicle routing (available if Streets data is installed with PC*MILER). Default = False |
| MAPPING= | TRUE FALSE | (AS/400 parameter) Default = False |
| EXPMAP= | TRUE FALSE | (AS/400 parameter) Default = False |
| [Options] | ||
| CustomRoute= | TRUE | Should PC*MILER Connect use Route Modifiers in routing. Route Modifiers are roads to avoid or favor as well as road closures created in Content Tools and synced with PC*MILER. |
HazRoute= | None General* Explosive Inhalant Radioactive Corrosive Flammable HarmfultoWater
| Hazardous material routing types for North America are: none (hazmat routing disabled), general, explosive, inhalant, radioactive, corrosive, or flammable. For Europe or Oceania, hazmat route types are: none, general, explosive, flammable, or harmful to water. *NOTE: “General” = “Other” in the PC*MILER UI, they are the same route type and algorithm. |
PartialCityMatch= | TRUE FALSE | Enables the return of a city match on a partial match of up to 28 characters. Default = False |
HistoricalRoadSpeeds= | TRUE FALSE | Toggles activation of traffic data. (You must be licensed for traffic data.) Default = True |
UseUSPostCodes= | TRUE FALSE | When set to TRUE, if a 5-digit postal code might be a U.S. or a Mexican code, the U.S. code will be used. Default = True (see note below)
|
UseMexPostCodes= | TRUE FALSE | When set to TRUE, if a 5-digit postal code might be a U.S. or a Mexican code, the Mexican code will be used. Default = False NOTE: If UseUSPostCodes and UseMexPostCodes are both FALSE, or not in the INI, the default U.S. code will be used. Also see IMPORTANT NOTE for PCMSLookup in section 3.7. |
UseStreets= (only if Streets data is installed with PC*MILER) | TRUE | Should street-level (T) or highway-only (F) routing be used when stops are city names or postal codes. Default = False |
UseSites= (only if Streets data is installed with PC*MILER) | TRUE | Should Site information be used when PC*MILER calculates distances, travel times and driving directions for a route. Default = True |
UseNLAbbrevInMX | TRUE FALSE | When set to TRUE, the “NL” abbreviation geocodes to Nuevo Leon in Mexico. |
CountryAbbrevType= | FIPS ISO2 ISO3 GENC2 GENC3 | For PC*MILER Worldwide, this option sets the country code format that will be accepted when using city name/country abbreviations as locations in regions other than North America. Default = FIPS |
DistancePrecision= | Whole Number Tenths Hundredths Thousandths | Sets the number of decimal places that will be returned when distances are calculated. Default = Tenths |
RouteSyncJSONFormat= | TRUE FALSE | For RouteSync users, sets the format of RouteSync blobs to JSON (v3) when True. Default = False |
[ConnectOptions] | ||
Anglicize= | TRUE FALSE | Turns on the global conversion of diacriticals (e.g. “Montréal, QC” into usable/displayable text strings.) Default = False |
| AvoidFavorAutoSave= | TRUE FALSE | (PC*MILER Connect) This option can be set to TRUE to autosave avoids/favors on shutdown. Default = False (Note: when this line is not present, default = false) |
| GeofenceAutoSave= | TRUE FALSE | (PC*MILER Connect) This option can be set to TRUE to autosave geofence data on shutdown. Default = True (Note: when this line is not present, default = false) |
LatLonFormatDecimal= | TRUE FALSE | Pertains to the function PCMSAddressToLatLong (deprecated in PC*MILER Connect 29), causing the function to return lat/longs in decimal degrees (e.g. 40.348848N,74.662703W). When this line is not included in the .INI or is included but =FALSE, the function returns degrees, minutes, seconds (e.g. 0402056N,0743946W). Default = False (Note: when this line is not present, default = false) |
[MappingOptions] | ||
| AvoidFavorAutoSave= | TRUE FALSE | (PC*MILER Mapping) This option can be set to TRUE to autosave avoids/favors on shutdown. Default = False (Note: when this line is not present, default = false) |
| GeofenceAutoSave= | TRUE FALSE | (PC*MILER Mapping) This option can be set to TRUE to autosave geofence data on shutdown. Default = True (Note: when this line is not present, default = false) |
[Defaults] | ||
| Region= | NA SA Africa Asia Europe ME Oceania (version 32 and below) OC (version 33 and higher) | Default region is NA (North America). Other regions are available worldwide with PC*MILER Worldwide. |
| ProductName= | PC*MILER | |
| ProductVersion= | 35.0 | Current version of PC*MILER. |
| DLLPath= | Usually | Path to the current installation of PC*MILER. |
